Vandweller Forum
Code name “Baby” - Printable Version

+- Vandweller Forum (https://vandwellerforum.com)
+-- Forum: Vehicle discussion (https://vandwellerforum.com/forum-3.html)
+--- Forum: Passenger (https://vandwellerforum.com/forum-64.html)
+--- Thread: Code name “Baby” (/thread-4489.html)



RE: Code name “Baby” - rvpopeye - 12-07-2023

Whaaaaaaa?


RE: Code name “Baby” - GypsyDogs - 12-07-2023

Sudden catastrophic, CEL, no run, doesn’t want to be in gear, die.
Sigh


fml
noticed mpg drop- attributed it to exhaust manifold leak
-
then serpentine belt tensioner pulley squeak (intermittent) have belt and pulley in hand..

Was supposed to leave for Qz next Monday …
-
Will query the obd1 after I get some sleep.

Stay tuned.


Code name “Baby” - Scott7022 - 12-07-2023

Fingrrd crossed. But better there than here.


Sent from my iPhone using Tapatalk


RE: Code name “Baby” - rvpopeye - 12-07-2023

razzafrazzamuzzawhyIoughtta !

What Scott said .

And every problem you fix is one less thing to do later.

Plans in jello , the vandweller way.

Arrrrrrrgh , so close !


RE: Code name “Baby” - GypsyDogs - 12-08-2023

LOL
Ok- Asked the obd..
got

“45* Transmission OD solenoid circuit short or open condition detected.”

Which is odd- van doesn't have OD...


RE: Code name “Baby” - GypsyDogs - 12-08-2023

Though it could be a false code because of the lack of overdrive…. Hmm
So that means No code… hmm


RE: Code name “Baby” - rvpopeye - 12-08-2023

Ghosts in the machine.
Computers in cars arrrrgh.
IDK , it's above my pay grade...
Do the wire wiggle shuffle ?


RE: Code name “Baby” - GypsyDogs - 12-09-2023

Wiggled things, shuffled others, tested what I could..
no resolution


RE: Code name “Baby” - rvpopeye - 12-09-2023

Look around the manifold area for anything unplugged , that was the last place disturbed under the hood.
Just throwing stuff out from my old school road repairs brain to see if anything sticks , it might not even be wiring .


RE: Code name “Baby” - GotSmart - 12-09-2023

There is a sensor on the AT with a couple of wires. Check around there. Also look for lose vacuum lines. Almost anything can cause a problem. 

Good luck.