03-29-2018, 07:00 PM
(03-29-2018, 06:55 PM)technomadness Wrote:The mats are only $30+/- I can tell you from experience they are pretty darn stiff. I've rolled around on creepers with them under a vehicle many times. Used them to protect the driveway from oil etc. . But they were too soft to support a floor jack with a vehicle weight on it. But then that's alot of weight in a small points of contact with mat.(03-29-2018, 06:37 PM)RepublicOfTXPatriot Wrote: Rubber stall mats from TSC . 4 ft X 6 ft X 3/4 thick
https://www.tractorsupply.com/tsc/produc...-stall-mat
I might use that or something like it, as my top layer flooring. Especially if I can’t find something like a vinyl version of wood.
One of the challenges is that instead of building a permanent chair, I’m planning to use a rolling executive chair.
In my current layout when sitting I’ll be sitting right at the passthru of the cab to cabin area. A rolling chair lets my not block the passthru.
But these chairs transfer their weight to 6-8 wheels so they can make dimples in softer material.
So something like plywood works to spread that weight out.
Sent from my iPhone using Tapatalk

![[-]](https://vandwellerforum.com/images/collapse.png)