11-21-2023, 08:36 AM
My existing BSW will probably work ok, but it is kind of luck of the draw as to whether the MOSFETs are well matched.
the 0.15 Nickel strio iz supposed tk arrive today, but i want to use the antispark XT90 connectors with it.
wWth the BSW basically shorting the batttery, using my Deka gc-2's means unhooking all lights and fans lest they be smacked around by transients and release their magic smoke.
my still healthy enough 22ah agm is a few years old, and below the 25to 55ah range recommended.
The pouch Lipos are a possibility, as is a larger new AGM, for powering the BSW independent tly of my GC2s that have a 5/17 build date.
ive been keeping them topped up mostly via powermax, and am notreally sure of their remaining capacity and health as i have no AH counter on it, and have not depleted them enough to see how much they gobble from the 100 amp powermax.
the 0.15 Nickel strio iz supposed tk arrive today, but i want to use the antispark XT90 connectors with it.
wWth the BSW basically shorting the batttery, using my Deka gc-2's means unhooking all lights and fans lest they be smacked around by transients and release their magic smoke.
my still healthy enough 22ah agm is a few years old, and below the 25to 55ah range recommended.
The pouch Lipos are a possibility, as is a larger new AGM, for powering the BSW independent tly of my GC2s that have a 5/17 build date.
ive been keeping them topped up mostly via powermax, and am notreally sure of their remaining capacity and health as i have no AH counter on it, and have not depleted them enough to see how much they gobble from the 100 amp powermax.
![[-]](https://vandwellerforum.com/images/collapse.png)